For over 30 years, Curtis Custom Welding has been providing quality, personalized welding needs to local individuals and businesses. Curtis Custom Welding's expertise ranges from basic repair, to more in-depth, custom welding services. Curtis Custom Welding is one of the leading welding firms in and throughout Portland. By combining our expertise and experience, I assure that every client receives the close analysis and attention they deserve. My dedication to high standards and work ethic is the reason our client base returns time after time. I have a full blown shop with all the tools imaginable so that I have the complete ability to repair what ever you need plus the ability of full metal fabrication. I can repair almost anything in our friendly, welcoming shop atmosphere, or I can come to you. Email me or give me a call to discuss your project!

Looking for Welders in Portland, OR?

Answer a few questions and we’ll get you free estimates from local businesses.

Find Pros
Hi there!
Rate this business!
First-classBetter than mostAbout what I expectedNot the worst...Disappointing
Click to Rate

Reviews

KL
Kylyn L.

02/25/2014

Provided by YP.com

Ron was excellent to work with. Couldn't ask for my job to come out better.. Would recommend him to anyone that needs welding to be done.. BLE

06/25/2012

Prompt service

I called in the AM several welding shops to do a small aluminum repair on my moped. Everybody wanted $100 plus and I had to leave it. Mr. Curtis took my call, said he took a fall and said he wasn't working today, maybe tomorrow. Went to Airgas only to find they recomended Mr. Curtis also. They said no job too small & if it could be fixed he'll fix it. I called back to Mr. Curtis only to ask him when he thinks he'll be up & working. He said he's up, sore but moving. Told me to bring the piece for repair by his shop. He looked at it, ground a little aluminum to clean and fit correctly. Did a great repair on a precision piece the kick start lever rides in. It may break again but not where the repair was done. Took it home, installed the springs, lever & gear reduction unit. Works perfectly. Excellent price, excellent work & very friendly enviroment. Couldn't nor wouldn't ask for better. Thanks Ron Curtis.

10/21/2011

Ron is #1 now I have #2

I am a large disabled 57 year old man in a power chair that can barely stand at all and in the apt I live in the toilet is 4 incjes from the wall on one side and 4.75 inches on the Vanity side. Don't know about you but my legs are bigger than that; let alone my caboose! I went to Ron at Curtis Custom Welding and asked him to modify this hospital sized kamode so I could use it as it has a bar accross the front making it nearly impossible to sit on and use at the same time. Ron cut the frame as I requested moved the legs in front so I could use it and when it was fininshed I spray painted it with primer and Krylon white and his welds were better than the factory ones were when it was new!!!Now I can use the damn ting and am one seriously happy camper. bThanks Ron you're the man.

08/28/2010

Excellent Craftsmanship on a Custom TV stand job

I went to Ron to have something done for my 60" flatscreen, because all the TV stands out there were so dull. I'm no artist, so I just sketched something up and took it to Ron. They looked at my idea, added some great suggestions of their own, and then they got to work. It was amazing what they put together in just 48 hours. You can't even get stuff delievered from a catalog in 48 hours! The finished product was awesome, 100% unique, and very reasonably priced. I will go here again for any metalwork.

07/19/2010

High Praise for Ron and his Soldering!

We came with an intricate soldering job for an expensive Lucid Absynthe dispenser. Not only did Ron make the repair while we were there, but he did it for us on a Sunday afternoon. (And, oh how we appreciated that.) Best of all, no one will ever know it had needed repair!

06/15/2010

Curtis Custom Welding

Mr. Curtis is knowledgeable regarding his craft, pleasant to know and a pleasure to do business with. His charges are reasonable and he is prompt. His shop is well equipped. I recommend him without reservation and fully intend to make further use of his services.

05/10/2010

Saved me lots of money with Honey Do...

The wife wanted me to buy all new outdoor furniture, because of cracks in our existing lawn chairs. Ron fixed within minutes of me being there!! Kiss my butt Home Depot, I got Ron!!

11/14/2009

Don't Be Fooled !!!

The reviews were good so I gave this guy a shot. Bad choice. The job was to weld two small pieces that were part of a camera tripod modification. The work was shoddy - burn marks and drips of material all over the piece. There are great blobs of material at the joints - not a smooth or clean job at all. I did better in 7th grade shop class. The piece was also damaged - a chunk taken out of one of the edges. And I was also charged for the removal of some glue that did not interfere with the weld areas. When I brought all this to Mr. Curtis's attention - almost two months ago - he offered to refund part of my money. I agreed to the offer and sent him an address to send the refund to. That was over a month ago. No refund has appeared and he is not responding to e-mail. This is adequate time to respond to the issues and he has chosen not to - if he does respond, I will modify this review.

10/13/2009

Good Job

Walked in unscheduled with a broken bracket for a YZ250F subframe. Walked out in 10 mins, all fixed!Good work, reasonable pricing and they couldn't be nicer folks.Highly recommended!

07/04/2009

Curtis Custom Welding

Found leaking water heater in RV trailer. Called Ron on July 3rd. He was very personable and helped us out with very fast service. Did excellent job welding aluminum tank at low price. Water heater works great with no leaks or problems. Grandchildren now enjoying wonderful 4th of July weekend camping.Thanks again Ron. Found out Ron welds most anything including stainless and cast iron. Will keep his card for future repairs. We highly recommend his services.

More Business Info

“If it’s broken.. I can fix it!”

BBB Rating
A+
BBB Rating and Accreditation information may be delayed up to a week.
Hours
Regular Hours
Mon - Sat:
Services/Products
Certified Mobile & Shop Repairs. About 75% of all my work is repair work, from auto to home to marine repairs. I have a full blown shop with all the tools imaginable so that I have the complete ability to repair what ever you need plus the ability of full metal fabrication. Check out some pictures on the "Repair Pictures" button to the left. Some examples of our repairs include: * Alloy * Steel * Aluminum * Cast Iron * Steel Fabrication * Magnesium * TIG * MIG * STICK Custom Work: About 25% of my work is custom work. I have built everything from stoves to doors to tables to ornamentals. All you need is an idea, and I can build it. Check out some pictures on the "Custom Pictures" button to the left. For over 30 years, Curtis Custom Welding has been providing quality, personalized welding needs to local individuals and businesses. Curtis Custom Welding's expertise ranges from basic repair, to more in-depth, custom welding services. Curtis Custom Welding is one of the leading welding firms in and throughout Portland. By combining our expertise and experience, I assure that every client receives the close analysis and attention they deserve. My dedication to high standards and work ethic is the reason our client base returns time after time. I have a full blown shop with all the tools imaginable so that I have the complete ability to repair what ever you need plus the ability of full metal fabrication.
Brands
Swedge Lock
Payment method
visa, check, discover, mastercard
Location
Serving Portland Metro Area
Neighborhoods
Powellhurst - Gilbert, East Portland, Powellhurst-Gilbert
Other Email

Categories
Welders, Brazing, Sheet Metal Fabricators, Welding Equipment Repair